400 Series Windows in Dallas–Fort Worth
Andersen 400 Series windows: a warm wood interior paired with protective exterior cladding, so the look is traditional inside with almost nothing to maintain outside. The line most of our customers land on.
- Since 1984Family-owned, one office in Arlington
- 15,000+North Texas homeowners served
- AndersenCertified contractor for windows and doors
- Four SeasonsAuthorized sunroom distributor
What comes with our 400 Series Windows
Most Popular
It is the Andersen line for homes where the windows need to match wood trim inside, without taking on the upkeep of a wood exterior in Texas sun.
Among the Andersen lines, the 400 Series sits between the 100 Series (composite frame, no wood inside) and the A and E Series (more style and color range, higher cost). For most brick homes in Dallas, Collin, Denton and Tarrant counties it gives the best balance of looks, durability and price, which is why so many customers end up here.
- Real wood interior you can stain or paint to match your trim
- Protective exterior cladding stands up to sun and storms
- Wide range of standard sizes and styles
Installing and caring for 400 Series Windows
It comes in the common styles: double-hung, casement, awning, gliding and picture units, so one line can cover the whole house.
A 400 Series install adds one step the 100 Series doesn’t have: the wood interior. We remove the old window, check the opening for rot and square, set and flash the new unit, then fit the interior trim so it lines up with the wood frame. If you ordered unfinished interiors, the wood gets stained or painted after we’re done, and we’ll talk through who does that and when so the finish isn’t rushed.
With the 400 Series, cost follows the number and size of openings, the mix of styles (a house of casements prices differently from one of double-hungs), interior finish (prefinished or bare wood), exterior color, glass and grille options. Hidden rot in the framing is the other variable, and we price it separately when we find it.
400 Series Windows: common questions
The 400 Series is wood inside, vinyl-clad outside: you get a paintable or stainable interior that matches trim, with a weatherproof exterior that never needs painting. In DFW the cladding is doing the real work, and the wood stays on the conditioned, indoor side.
On average our installation teams complete window installations within 2 to 4 days once your windows arrive. Custom-built windows take time to manufacture after measuring.
Customers regularly report noticeably lower summer cooling costs and a quieter house. Savings depend on what you’re replacing. Single-pane aluminum windows show the biggest change.
Yes. Where your city requires one, we file it and deal with the inspection.
The wood needs a finish to protect it. You can order it prefinished or have it stained or painted to match your trim. We’ll talk through which makes sense for your rooms.
Wash it with mild soap and water, keep the weep holes clear, and check the caulk line around the frame once a year. The cladding does not need paint.
Before You Commit to 400 Series Windows
- Decide how the wood is finished. The interior is real wood, so choose the stain or paint to match your trim, and whether it arrives prefinished or is finished on site.
- Pick the operating style room by room. Double-hung suits traditional elevations; casements open fully for air and seal tightly when closed. One house can use both.
- Match the grilles to the elevation. Grille patterns change how a window reads from the street, so they follow the style of the house rather than a single default.
How does a 400 Series window project run?
- 1
A free measure and estimate
Every opening is measured individually, because a house rarely has two identical ones. You see the series options side by side and get a firm written estimate.
- 2
Built to your openings
Andersen builds the units to those measurements, so the installers are not shimming a stock size into a hole it does not fit.
- 3
Installed and sealed
Our own crews set, flash and seal each unit, then trim inside and out.
- 4
Walkthrough and warranty
We check operation and locks on every window with you, clean up, and hand over the manufacturer warranty alongside ours on the installation.
Who builds your project
- Family-owned since 1984. Dallas–Fort Worth homeowners have hired American Eagle Builders for four decades, and the business is still family-owned and operated.
- 15,000 satisfied homeowners and counting. Many have come back for a second project, or called us twenty years later for a repair.
- Free estimates and design consultations. A specialist visits, measures, and gives you a detailed written estimate with no surprises.
- Permits handled. We work with your city on the building permit so the schedule does not stall on paperwork.
- Comprehensive warranty. Every service we offer is backed by a comprehensive warranty, plus financing for various credit levels.
Free in-home estimate
A specialist visits, measures and talks through what you need. No obligation.
Get My Free Estimate (469) 949-5909- Family-owned since 1984
- Permits handled with your city
- Financing up to 100%
Reading on 400 Series Windows
Practical notes on your home in North Texas.
Window Replacement Mistakes to Avoid in Texas
Ten window replacement mistakes in the order they tend to happen, from the first estimate to the final walk-through, with a test for each one.
Best Window Series for DFW Homeowners
A plain comparison of the four Andersen window series we install, with a short test for matching a series to your house, your trim and your sun.
Double-Pane vs Triple-Pane Windows: Which Is Worth It?
Where a third pane of glass helps in North Texas, where a good double-pane window does the job, and the two label numbers that settle the question.
Other window options
Page last updated November 1, 2026.
Free estimate on 400 Series Windows
We’ll come out, measure, talk through the options and give you a firm number. No obligation.
Call (469) 949-5909Get Your Free Estimate
4.4 on Google from 206 reviewsFamily-owned since 1984