The work American Eagle Builders built its name on since 1984. Replacing windows and siding at the same time lets the flashing tie together properly, and one company stands behind all of it.
Each of these is its own trade with its own crew. What they share is the standard: measured twice, sealed properly, and finished the way we would want on our own homes.
Window Series
Custom-measured, professionally installed windows that cut cooling costs, quiet the road outside and make the whole house look newer. We carry the full Andersen line and fit every opening to size. American Eagle Builders is a certified Andersen contractor for windows and doors.
Siding Options
Replacement siding (insulated vinyl, standard vinyl and Hardie fiber cement) installed on homes across Dallas–Fort Worth. For houses where hail, sun and hundred-degree summers have worn the exterior, it holds its color, seals the envelope and changes how the house reads from the street.
Door Types
Entry, sliding, hinged patio and storm doors, replaced with the framing and trim work done properly. For homeowners who want a better first impression and a tight seal at the last weak point in the envelope.
Insulation Types
Attic insulation (blown-in, spray foam and radiant barrier) for Dallas–Fort Worth homes that run hot upstairs in August or cold in a freeze. A well-insulated house holds its temperature instead of chasing it, and the bill drops as a side effect.
We measure every opening and wall on the house, talk through the options for each, and give you a firm written price.
Windows and doors are built to those measurements and siding is ordered for your walls, so nothing is forced to fit on install day.
Windows go in before the siding wraps around them, so the flashing ties together instead of being patched around.
We walk the finished house with you, settle the punch list and leave one warranty covering the work.
Fibrex is Andersen’s composite: reclaimed wood fiber bound in polymer. It holds its shape in Texas heat better than vinyl, which softens and can bow on a wide west-facing opening, and it lets the frame be narrower for the same strength, so you get more glass and less frame.
The 400 Series is wood inside, vinyl-clad outside: you get a paintable or stainable interior that matches trim, with a weatherproof exterior that never needs painting. In DFW the cladding is doing the real work, and the wood stays on the conditioned, indoor side.
If your priority is comfort and energy performance, insulated. If it’s the lowest cost route to a new exterior, non-insulated vinyl. Hardie fiber cement is the premium, most durable option. We’ll show you samples against your brick on site.
Decide how much light you want against how much privacy, then whether sidelights or a transom suit the front of the house. We bring samples so you can see them against your brick and trim.
Sliding if floor space is tight, since nothing swings into the room. Hinged for a wider clear opening and a more traditional look. Both seal better than a tired original.
Spray foam seals air leaks as it insulates, so it’s best when the attic is leaky. Blow-in is the practical way to top up an under-insulated attic. We’ll tell you which one pays back faster for your house.
Free in-home estimate
A specialist visits, measures and talks through what you need. No obligation.
Get My Free Estimate (469) 949-5909Page last updated November 1, 2026.
Tell us what you have in mind and we’ll come measure, talk options and give you a straight number. No obligation, no pressure.
4.4 on Google from 206 reviewsFamily-owned since 1984
Practical notes on your home in North Texas.
Ten window replacement mistakes in the order they tend to happen, from the first estimate to the final walk-through, with a test for each one.
A layer-by-layer look at how water gets behind siding, seven installation mistakes in build order, and how to check the work before the panels cover it.
A plain comparison of the four Andersen window series we install, with a short test for matching a series to your house, your trim and your sun.
